What is the user weight limit on the Grey Ergonomic Mesh Chair with Headrest & Tilt?

300 kg. That rating rests on a BIFMA-tested 340mm nylon base and BIFMA-certified 60mm PU castors, the same structural specification used across this series. The chair weighs 17 kg and measures roughly 39cm across.

Does the Grey Ergonomic Mesh Chair with Headrest & Tilt have adjustable lumbar support?

Yes, and it is tuned by hand to your lower spine. When you sit forward the lumbar support takes the load; when you tip back on the tilt mechanism, the height-adjustable headrest catches your neck and upper back instead.

Is the Grey Ergonomic Mesh Chair with Headrest & Tilt suitable for 8+ hours at a desk?

Yes, it is built for concentration that lasts. Constant airflow through the mesh backrest keeps long stretches from turning sticky, the 55-degree molded foam seat spreads pressure evenly, and 4D armrests plus pneumatic height adjustment place your elbows correctly.

Which offices is the Grey Ergonomic Mesh Chair with Headrest & Tilt intended for?

Directors' offices, board anterooms, hospital reading rooms, call centre control desks, faculty studies and serious home setups. At SAR 850 it is the top configuration in the series, and grey keeps it discreet where furniture should not compete.

How quickly can the Grey Ergonomic Mesh Chair with Headrest & Tilt reach a Riyadh address?

Shipping is handled by Aramex, and a Riyadh address normally receives the chair 2-5 business days after dispatch. We send to every region of Saudi Arabia, using the same courier for addresses well beyond the capital.

Do I have to build the Grey Ergonomic Mesh Chair with Headrest & Tilt myself?

Only if you want to. The chair reaches you flat-packed and self-assembles within minutes, but installation is available on request. Base and castors take the gas lift, the seat and mesh backrest mount above the mechanism, and the adjustable headrest fixes to the top of the back.

Grey Ergonomic Mesh Chair with Headrest & Tilt Saudi Arabia

Secure Payment
Installation
Trusted Brand
Easy Return

Grey Ergonomic Mesh Chair with Headrest & Tilt

850

7 out of 10

Designed for demanding, high-paced workplaces, this 3D ergonomic task chair combines a durable 340mm nylon base, a breathable high-quality fabric back, Adjustable Lumber support and a 55-degree molded foam seat, with BIFMA-certified components throughout from armrests to castors.

166 in stock

SKU: GL-N2H GR
Category: Ergonomic Office Chair
Tags: Ergonomic Office Chairs Mesh Office Chairs Budget Office Chairs Chairs for Long Working Hours

Estimated Delivery Time 2 to 7 business days

In short

The Grey Ergonomic Mesh Chair with Headrest & Tilt is an ergonomic office chair from Gloory. It is priced at SAR 850, ships across Saudi Arabia and is covered by a 5-year warranty.

The grey one with the headrest, top of the range. Gloory's Professional Series 3D Ergonomic Task Chair arrives here in grey with a height-adjustable headrest fitted, which makes it the pick for anyone whose day includes thinking time as well as typing time.

Recline is where it separates itself. Tip back on the tilt mechanism and the headrest catches your neck and upper back instead of leaving them unsupported in mid-air. Sit forward again and the adjustable lumbar support takes over, tuned by hand to your lower spine. The high-quality mesh backrest keeps a constant flow of air moving, so long stretches at the desk never turn sticky. A 55-degree molded foam seat spreads pressure evenly and keeps its shape, while the 4D armrests adjust up, down, forward, back and inward until your elbows sit right.

Underneath, the specification matches the rest of the series and is none the worse for it: a BIFMA-tested 340mm nylon base, BIFMA-certified 60mm PU castors, pneumatic height adjustment, and a supported weight of up to 300kg. Expect about 39cm across and 64cm high, at 17 kg.

Directors' offices, board anterooms, hospital reading rooms, control desks in call centres, faculty studies, serious home setups. The brief is the same wherever concentration has to last more than an hour, and grey keeps it discreet. SeatSpace handles delivery across Riyadh and the wider Kingdom.

Key Features

The Professional Series 3D Ergonomic Task Chair is a versatile seating solution designed to withstand the demands of a high-paced work environment

Built on a durable 340mm nylon base, it features a breathable high-quality fabric back, Adjustable Lumber support and a seat made of 55-degree molded foam for consistent comfort

With a focus on structural integrity, this chair integrates BIFMA-certified components from the armrests to the castors, ensuring a safe and reliable experience for every user

Dimensions: 72 x 39 x 64 cm (L x W x H)

Weight: 17 kg

Category: Ergonomic Office Chair

Care & Maintenance

Clean the mesh backrestVacuum the mesh weekly with a soft brush attachment to lift dust from the weave. For marks, dab with a cloth dampened in mild soapy water and let it air-dry fully before use — never soak the mesh or use solvent cleaners, which weaken the fibres.
Condition the upholsteryWipe with a dry microfibre cloth weekly. Every three months, apply a small amount of leather conditioner to keep the surface supple — important in Saudi Arabia's dry indoor climate, where untreated leather can crack. Keep the chair out of direct sunlight.
Keep the castors rolling freelyTip the chair on its side every few months and pull hair and fibre out of the wheel housings. Clogged castors are the most common cause of a chair that drags or scuffs flooring.
Check the height mechanismRaise and lower the seat through its full travel once a month. Smooth, even movement means the gas lift is healthy; if the seat sinks under load, the cylinder needs replacing — it is a serviceable part, not a reason to replace the chair.
Re-tighten the fixingsEvery six months, check the bolts under the seat and at the armrests with the supplied key. Fixings loosen gradually with daily use, and tightening them early prevents wear on the joints.

Comparison with similar chair

	Grey Ergonomic Mesh Chair with Headrest & Tilt SKU: GL-N2H GR 850 Currently Viewing	Red Ergonomic Office Chair with Adjustable Headrest SKU: AFP-ALC 880	Mesh Task Chair with Synchronized Tilt & Headrest - Black SKU: AFP-S-30-LC 980	Ergo-Pro High-Back Mesh Chair with Fabric Headrest & 3D Arms SKU: GL-E8H 615	Elite Mesh Task Chair with Headrest - Black, Tilt & Lumbar SKU: GL-B185HB 420	Ergonomic Mesh Chair with Adjustable Headrest & 3D Arms SKU: GL-E830HB 630	3D Mesh Chair with Adjustable Headrest - Black SKU: GL-N2H 680	Radius High-Back Mesh Task Chair - Black Body / Red Cushion SKU: AFP-RHBC 1,470	Ergonomic Mesh Chair - Synchronised Mechanism & T-Armrests SKU: AFP-E1-E100 880	Mesh Task Chair with Fixed Arms & 330 PP Tripod Base - Black SKU: GL-B85S 515	White Mesh Task Chair with Nylon Mesh Back & PP Tripod Base SKU: GL-W85-WH 480	Ergo-Flow Mesh Visitor Chair - Black Chrome Cantilever SKU: GL-E8V 480	Ergo-Pro High-Back Mesh Task Chair with Auto-Weight Recline SKU: GL-E8M 560
Brand
Short description	Designed for demanding, high-paced workplaces, this 3D ergonomic task chair combines a durable 340mm nylon base, a breathable high-quality fabric back, Adjustable Lumber support and a 55-degree molded foam seat, with BIFMA-certified components throughout from armrests to castors.	Ergonomic office chair engineered with a curved backrest for the spine's natural curvature, easing back pain through long working hours. Adjustable seat height, tilt tension, armrests and headrest, 360-degree swivel, five-wheel base, cushioned breathable-fabric seat and durable frame.	A task chair built for good posture: adjustable lumbar support pad and a breathable, highly elastic mesh backrest that adapts to your position. The synchronized mechanism tilts seat and backrest in tandem with weight-matched tension control, plus seat-slide depth adjustment, height-adjustable armrests and an adjustable-height headrest.	A high-performance high-back mesh task chair for professionals who need breathability and long-term support: fabric headrest, ventilated mesh backrest and molded foam fabric seat, anchored by a high-strength nylon base with a sophisticated auto-weight mechanism in sleek all-black.	Ergonomic task chair for office environments: a high-strength engineering-grade PP and glass fiber frame in classic black, with a mesh backrest and specialized one-piece shaped sponge seat for durability and long-term postural support.	Durable, stylish ergonomic task chair built around a sleek high-strength nylon frame with a breathable high-quality fabric back and 55-degree molded foam seat, BIFMA-certified, finished in minimalist gray or classic black.	Professional Series 3D ergonomic task chair for high-paced work environments, built on a durable 340mm nylon base with a breathable high-quality fabric back, Adjustable Lumber support and a 55-degree molded foam seat; BIFMA-certified components run from the armrests to the castors.	The Radius is a dynamic task chair whose customisation suits all levels, with a body contoured mesh back design, supportive seat pad, world class technology and ergonomic styling. 3D armrests, seat slide, tilt control and easy tension adjustment suit every individual's needs.	Ergonomic task chair with mesh backrest, fabric seat, synchronised mechanism and fixed T-type armrests.	Black PP-and-fiber back frame with headrest, high-quality office mesh, shaped-cotton seat frame, fixed armrests, one-piece lifting chassis, S3-level 100/6 high-piston air rod, 330 PP tripod feet and 50PU black wheels.	A modern, clean-lined mesh task chair with a high-quality engineering-grade PP and fiber frame, breathable nylon mesh back, durable fabric seat, stable 330 PP tripod base and smooth-rolling black PU wheels: minimalist looks with real structural strength.	Contemporary chair for high-traffic environments, guest lounges and collaborative spaces: ventilated mesh backrest, plush fabric-upholstered seat for thermal comfort, and a 2.0MM chrome-plated visiting base whose cantilever design ensures structural reliability.	Triple-material construction, fabric headrest, ventilated mesh backrest and molded foam fabric seat on a high-strength nylon base, with an auto-weight mechanism that matches recline resistance to your body weight. Sleek all-black finish for corporate or home offices.
Warranty	2	2	2	2	2	2	2	2	2	2	2	2	2
Expert rating	7 out of 10	7 out of 10	7 out of 10	6 out of 10	6 out of 10	6 out of 10	6 out of 10	7 out of 10	7 out of 10	6 out of 10	6 out of 10	6 out of 10	6 out of 10
Dimensions	Height: 64; Width: 39; Depth: NA; Weight in Gr: 17	Height: 64cm; Width: 61cm; Depth: NA; Weight in Gr: 18.5 Kg	Height: 64cm; Width: 61cm; Depth: NA; Weight in Gr: 18 Kg	Height: 63; Width: 34; Depth: NA; Weight in Gr: 17.8	Height: 63; Width: 47; Depth: NA; Weight in Gr: 24.5KG（1 carton/2 pcs)	Height: 64; Width: 36; Depth: NA; Weight in Gr: 16.8	Height: 64; Width: 39; Depth: NA; Weight in Gr: 17	Height: 64cm; Width: 61cm; Depth: NA; Weight in Gr: 21 Kg	Height: 64cm; Width: 61cm; Depth: NA; Weight in Gr: 17 Kg	Height: 61; Width: 58; Depth: NA; Weight in Gr: 20	Height: 61; Width: 58; Depth: NA; Weight in Gr: 20	Height: 40; Width: 53; Depth: NA; Weight in Gr: 16	Height: 63; Width: 34; Depth: NA; Weight in Gr: 17.8
Color	Grey	Red	Black	Black	Black	Black	Black	Black Body Red Cushion	Black	Black	Black	Black	Black

Grey Ergonomic Mesh Chair with Headrest & Tilt

Key Features

Care & Maintenance

Related products

Comparison with similar chair

Chair Finder Quiz

What's your primary use?